Worktop replacement in Clapham Park

Yes. Clapham Park is on the patch, and the postcodes we work here are SW4, SW2. It is worked on our south London run, along with the rest of Lambeth. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Old estate kitchens often still have asbestos-era boxing around ducts, so nothing gets cut or drilled into that boxing without the landlord's confirmation of what it is.

The estate roads have controlled parking bays and the blocks use entryphone systems, with lifts in the taller blocks and stair-only access in the low-rise. New regeneration blocks have proper service entrances but require induction and booked lift time. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop splashbacks & upstands and worktop installation. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Old tops out in the morning, new stone down and sealed the same afternoon. A plumber either side of us. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Sort a parking bay or permit near the entrance, confirm the lift is in service and get us the door codes, and tell us about any asbestos survey on the flat before we start stripping out. These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. If the carcasses are tired the honest answer is that stone will find that out, and it is better said before than after. Sound carcasses are the condition.