Worktop fabrication in Clerkenwell

Yes. Clerkenwell is on the patch, and the postcodes we work here are EC1. It is worked on our north London run, along with the rest of Islington. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. Where unloading has to happen in one go, the load order is planned so nothing has to come off twice. The load plan follows from it. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. The kitchen is open plan and the island is often long enough to need a join, and it sits in the middle of the room where every edge is visible, so the join goes over a gable and usually under the hob line where the eye does not follow it. Every join over a gable, clear of every cut-out. The floors in these conversions are old timber over long spans and are rarely flat, so level and pack the island carcass properly before setting stone or a 3m top will telegraph every dip.

Inside the Congestion Charge zone with narrow one-way streets, loading bans through the busiest hours and traffic filters on several residential blocks. Many converted buildings retain a goods lift, which is the difference between a one-piece island and a jointed one. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. The maximum piece length is fixed at drawing stage and every join is placed over a cabinet gable from there. The drawing carries that decision through to the saw.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop design & quotation. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. So the nesting is planned around it rather than around a standard kitchen. Proven on the bench before dispatch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Nested for the job in front of us.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. That is nested before any glass goes on the saw. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. Cut it square where it should be radiused and the piece will fail on the lift, not in the kitchen. The drawing decides it, not the fitter. The island layout, including whether the ends are mitred down to the floor, needs settling before cutting, since mitred ends are cut in sequence with the top and dry-assembled as one unit. A let property is specified for durability and for a fixed window, and both of those are legitimate reasons to choose differently. Sink and hob are dry-fitted on the bench before dispatch, whoever supplied them. Dry-assembled before it leaves.