Kitchen worktops in Crouch End

Yes. Side-return infills are the default job here - the old 1.8m galley in the back addition becomes a 3.5m run with a small island or a peninsula, usually with a rooflight overhead. Above the Broadway there are conversion flats where the kitchen is a 2.4m run in a former reception with the cornice still running over it. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window.

Victorian terrace, Edwardian conversion flat and 1930s mansion block. Where the side return has been filled in, the old external wall is now an internal one and still carries its render, its gutter line and its old fixings. Victorian party walls and chimney-breast returns bow along their length, so the template plots the real line rather than assuming a straight one - the template picks up points every few hundred millimetres down the back of the run and the drawing carries that curve through to the saw. Recorded as it is, not as it was drawn.

Everything is on a hill. Crouch End Hill and Crouch Hill are steep enough that a loaded trolley needs two people on the downhill side, and the Broadway has short-stay bays and heavy bus traffic. Top-floor conversion flats have no lift and a narrow Victorian dogleg stair. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. A template taken without walking the route produces a drawing that cuts beautifully and will not go in. It goes on the drawing with the run dimensions.

Worktop templating, worktop installation and worktop replacement, in that order. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first. Conversion flats above the shops have springy joisted floors - check deflection under the island position before committing to a 20mm slab.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Carcasses have to be sound first. A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A template booked hopefully around another trade is the commonest cause of a wasted visit. No stone is cut from a plan. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.