Worktop design and quotation in Edmonton Green

Yes. Edmonton Green is on the patch, and the postcodes we work here are N9. It is worked on our north London run, along with the rest of Enfield. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. It sits in the fitting line as time on site rather than as anything to do with the stone. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Entry-phone access, a booked lift and a parking bay near the entrance all have to be arranged before a date is confirmed. The fixed lines do not shrink with the room, so on a small kitchen they are a larger share of the total than the stone. You see it before you commit to anything. Measure the lift and the stair half-landing before you promise a single-piece top here, because most of this stock forces a joint you did not want.

Block work means booking the lift with the estate office, and in the older towers the lift car is under 2m diagonal, so a 3m slab will not go up - it goes in cut, or up the stairs with four men. Parking is on the estate roads with permit restrictions. The lift has to be booked and blanketed before anything moves, and that booking needs to cover the old tops coming out as well as the new stone going in. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Send the run lengths plus a photo of every corner of the kitchen so we can spot boxed ducts, and tell us whether the sink is staying in the same position. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying.