Worktop replacement in Greenhill

Yes. Greenhill is on the patch, and the postcodes we work here are HA1. It is worked on our north west London run, along with the rest of Harrow. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Service risers from the original building run through the flats. They are boxed, they stay, and they have to remain accessible. The work is all in the building, not the kitchen. What is under the old top is the real question. Office conversions have shallow floor-to-ceiling zones and boxed services above the units, so measure the clearance for tilting a slab upright inside the room.

Multi-storey and podium parking with height barriers, controlled loading bays with strict time limits, and goods lifts that need booking through building management. Station Road and College Road restrictions rule out casual kerbside unloading. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. We plan the strip-out and the carry as one movement so the kitchen is only out of use for a single day. It sets what the day actually looks like.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop splashbacks & upstands. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. The carcasses have to be sound, because stone is several times the weight of what is coming off. Sound carcasses or it does not go ahead. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Book the service lift, loading bay and concierge access for the full day, and confirm the building's permitted working hours in writing. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed.