Worktop fabrication in Gunnersbury

Yes. Gunnersbury is on the patch, and the postcodes we work here are W4, TW8. It is worked on our west London run, along with the rest of Hounslow. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. Pieces are loaded in reverse fitting order so the first thing off the van is the first thing that goes down. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These blocks were built with a lift from new, which will usually take a worktop and almost never takes a full-length island piece. Ceilings are high and external walls are thick, so the run under the window sits in a deep reveal and the back edge has to be templated to the reveal rather than assumed square. Settled on the drawing, cut once. New-build carcasses here are 18mm with 20mm tops and no oversail to play with, and the lift car dimension sets your maximum piece length before the design does.

Delivery itself is easy with the Chiswick roundabout and North Circular right there, but the newer blocks mean booked service lifts, a timed loading bay and security sign-in before you touch anything. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. The maximum piece length is fixed at drawing stage and every join is placed over a cabinet gable from there. It is settled on the bench, not on site.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. So the nesting is planned around it rather than around a standard kitchen. Same slab run, or it is not a match. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Pieces are dry-assembled and checked on the bench before anything is loaded. Nested for the job in front of us.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. Pieces are dry-assembled on the bench before dispatch so the corners are known to close before they leave the workshop. Every join sits over a gable. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. The template drawing carries the real geometry through to the saw, and the piece is machined to it rather than trimmed to it later. Radiused, polished, and clear of the joins. Access arrangements and the porter's permitted hours need confirming before we cut, because the agreed piece size is what the nesting is built around. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Sink and hob are dry-fitted on the bench before dispatch, whoever supplied them. Changes cost a piece, not a tweak.