Kitchen worktops in Holland Park

Yes. Villas here carry full-width lower ground kitchen and family rooms, frequently with two islands or an island plus a separate prep run, and single pieces of 3.6m and up are normal rather than exceptional. Book-matched veined stone on a waterfall island and a matching full-height rear panel is the standard specification, which means slab selection at the yard comes before any cutting. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window.

Italianate detached and semi-detached villa, large stucco terrace, 1960s-70s architect-designed infill house and gated modern townhouse. Listing and conservation conditions apply to a good number of these, which constrains what can be altered around the kitchen rather than what goes on top of the units. The galley run down a side-return usually measures longer than a slab will give us, so a join is designed in from the start and nested to land over a cabinet gable rather than wherever the material happens to run out. Settled on the drawing, cut once.

Several roads are private or gated with gravel drives and speed humps, and gravel is the enemy of an A-frame trolley, so the load usually has to be carried from the road edge. Where houses have their own side gate to the garden it is worth using it, because the main staircases here are wide but turn twice and the balustrades are frequently listed and cannot be unbolted. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. So the nesting is worked to the measured route first and to the slab second. It is settled on the bench, not on site.

Worktop design & quotation, worktop fabrication and worktop installation, in that order. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. So the nesting is planned around it rather than around a standard kitchen. Proven on the bench before dispatch. The island pieces routinely exceed what six men can hand-carry down a domestic stair, so budget for glass suction and a stair crawler rather than assuming extra labour will solve it.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. The join count is stated with its reason. A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. The template drawing carries the real geometry through to the saw, and the piece is machined to it rather than trimmed to it later. Radiused, polished, and clear of the joins. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. Changing an appliance after the nest is set means recutting the piece, not adjusting it. The approved drawing is the instruction. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.