Kitchen worktops in Lower Sydenham

Yes. Flatter ground by the river with postwar estate housing and interwar semis; kitchens are modest rear rooms with a back door, standard 600mm units and runs around 2.4m to 3m, and the work is straight replacement rather than redesign. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap.

postwar estate housing, 1930s semi, Victorian cottage terrace and industrial-edge conversion. Many have been extended at the rear since being sold, so the kitchen is half original and half newer with a floor junction between the two. Ex-council flats and maisonettes are built in dense concrete and blockwork, so anything that has to be fixed back, such as brackets under a peninsula or support for an end panel, goes in with proper anchors and an SDS rather than plasterboard fixings. Units kept, surface changed, one day.

Wide roads, industrial estate access and genuine turning space for a long van, one of the easier parts of Lewisham to deliver into, though estate parking courts get blocked. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Worktop replacement, worktop fabrication and worktop installation, in that order. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Simple rectangular rooms and easy parking, so the only real catch is 1970s carcasses that have gone out of level.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. That is nested before any glass goes on the saw. A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. The template drawing carries the real geometry through to the saw, and the piece is machined to it rather than trimmed to it later. Radiused, polished, and clear of the joins. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. The approved drawing is the instruction. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.