
Kingston upon Thames · KT9
Worktop installation in Malden Rushett
Fitting day: protected route, back edges scribed to the real wall line, joins pulled flush, sink and hob sealed.
- 5.0from 23 Google reviews
- 25-year material · 5-year workmanship
- Fitted 3-7 working days from template
Malden Rushett kitchens
What the kitchens here are actually like
A hundred and forty years of alterations sit under the current kitchen, and the worktop is what has to sit flat on top of all of it. The fitting day is planned backwards from all of it, before the first piece comes off the van. The route is walked before the first lift.
Green-belt fringe housing - cottages with small low-ceilinged kitchens and thick uneven walls, and detached houses and bungalows with big open kitchen-diners where a 3m island and a full-height larder wall are the ask, often with an oil or LPG installation to work around.
Cottage walls here are rubble or soft brick and nowhere near plumb, so upstands and end scribes take longer than the run itself.
Deep original skirting is often left in behind the units, standing them off the wall, so the back edge of the stone is plotted where the carcasses actually sit. The day is planned backwards from the hall, and the scribing takes longer than the carry. That is the shape of the day.
What we are usually templating in is Victorian cottage, interwar detached, postwar bungalow and modern rural-edge house. Each of those behaves differently once the old top comes off.
True everywhere
Worktop installation, in short
- One visit. A straightforward run is a morning; an island and splashbacks take most of the day.
- Every piece is carried in by hand, and stone does not bend.
- We seat and seal the sink and hob. We do not connect water, waste, gas or electrics.
- Floors and units are protected before anything comes through the door.
Covered on our south west London run. Fitted 3–7 working days from template.
Victorian and Edwardian terraces
What gets asked for here
Second or third on the list around here, after worktop templating. Same visit, same bench, same crew, same lead time.
Victorian and Edwardian terraces
The building, and what it does to the job
The hallway turn and the door width, which cap the longest single piece we can physically get to the kitchen regardless of what the run measures.
Victorian and Edwardian terraces
Getting stone into the room
Semi-rural approach on fast single-carriageway roads with no pavement in places, gravel and unmade drives, and gates that a long-wheelbase van cannot swing into without dropping the load at the roadside.
Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. The day is built around that window.
Access
Getting stone into a Malden Rushett kitchen
Semi-rural approach on fast single-carriageway roads with no pavement in places, gravel and unmade drives, and gates that a long-wheelbase van cannot swing into without dropping the load at the roadside.
Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it. Where the route is genuinely tight, it changes how the pieces are cut, which is a fabrication decision rather than a delivery one.
3–7 working days
From template to fitted, working days from template. The same on this patch as every other.
south west London patch
Malden Rushett is covered on our south west London run, along with the rest of Kingston upon Thames.
We come to you
Templated in your kitchen, cut in our workshop, fitted by our own installers.
Access told straight
If the route forces an extra join, you hear that at quote stage, not on the day.
Questions
Worktop installation in Malden Rushett
If yours is not here, ring and ask. You get a straight answer rather than a call-back from a salesperson.
Do you cover Malden Rushett?
Yes. Malden Rushett is on the patch, and the postcodes we work here are KT9. It is worked on our south west London run, along with the rest of Kingston upon Thames. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.
Does the housing in Malden Rushett change how worktop installation works?
The bay at the front and the back addition at the rear were built to different standards, and the kitchen is nearly always in the weaker of the two. The day is planned backwards from the hall. Walked, measured, protected, then lifted. Cottage walls here are rubble or soft brick and nowhere near plumb, so upstands and end scribes take longer than the run itself.
How does the stone actually reach a kitchen in Malden Rushett?
Semi-rural approach on fast single-carriageway roads with no pavement in places, gravel and unmade drives, and gates that a long-wheelbase van cannot swing into without dropping the load at the roadside. Garden routes carry their own hazards: a drain cover, a step up to a patio, wet decking, or a lawn that will not take a loaded trolley. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.
Is worktop installation common in Malden Rushett?
It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.
Why do two Malden Rushett kitchens the same size price differently?
If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.
What has to be finished before you can template?
Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. The back edge is eased in progressively rather than offered up once and forced. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first.
Related
More around Malden Rushett
Other work we do in Malden Rushett
Next step
Worktop installation in Malden Rushett, priced properly
Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.
25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.