Kitchen worktops in North Finchley

Yes. A real split between family terraces and semis off the main road, where kitchens get extended into decent 3.6m plus island layouts, and flats over the High Road shops where the kitchen is a fixed 2.4m run in a converted first-floor room. The flats above the parades are consistently the tightest work in the district. Loading exemptions on red routes are narrow, time-limited and heavily camera-enforced, so we plan around them rather than relying on them. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause.

Edwardian terrace, 1930s semi, flats above the High Road parades and post-war low-rise block. A flat over a shop is reached by a separate street door and a straight steep stair, and that stair is the whole access question. Post-war terraces have a fairly shallow, standardised kitchen, and the walls tend to lean rather than bow, so the scribe at worktop height is different from the one at plinth level - the template only cares about the line where the stone will land. Recorded as it is, not as it was drawn.

Ballards Lane and the High Road are bus corridors with clearway restrictions, and the flats above shops are reached from rear service yards up an external steel or timber staircase. Residential side streets are easier but permit-controlled. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. A template taken without walking the route produces a drawing that cuts beautifully and will not go in. It goes on the drawing with the run dimensions.

Worktop replacement, worktop templating and worktop splashbacks & upstands, in that order. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. External stair access to shop flats limits pieces to what two people can safely carry up open treads, usually under 2m, so plan seams accordingly.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. The same shape decides where splashback pieces break, and a joint in a corner reads as a detail while one in a clear run reads as a mistake. Corners get their own pieces. Exposed structure means the back edge is not a straight line at all, and a scribe of fifteen or twenty millimetres across a run is normal. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. Plotted, not estimated. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Units kept, surface changed. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.