Worktop design and quotation in Norwood Green

Yes. Norwood Green is on the patch, and the postcodes we work here are UB2. It is worked on our west London run, along with the rest of Ealing. Without a bay the van ends up on a single yellow with a crew member watching it, which takes a pair of hands off the carry. It sits in the fitting line as time on site rather than as anything to do with the stone. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The kitchen is usually a rear room extended into the garden, with the original external wall now standing inside the run. Slab yield rather than floor area is what moves the material line, and the return piece is usually the reason. You see it before you commit to anything. Islands here regularly exceed 3.2m, which means either a jumbo slab or a deliberate mitred joint, and that decision has to be made before slab selection not after.

The green itself is conservation-controlled with narrow lanes, but the surrounding houses have wide gated drives. Tentelow Lane is the practical route in. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. Nothing about it gets estimated after the fact.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop fabrication and worktop installation. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly.

Seating overhangs past roughly 300mm will not carry on the carcass alone, so flat steel bar or a plywood substrate has to be built into the units first. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a breast interrupts a long wall the join can often go there, so it reads as a natural break rather than a line in the middle of a worktop. Send photographs of every corner of the room and it gets priced properly first time. Photographs are worth more than a plan here. Send the extension drawing or the unit layout with the actual appliance model numbers, since cut-out sizes come from the appliance, not the cabinet. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Nothing payable until template.