Worktop installation in Seven Kings

Yes. Seven Kings is on the patch, and the postcodes we work here are IG3. It is worked on our east London run, along with the rest of Redbridge. Enforcement zones rarely accept a trade van unloading stone as an exemption, so this gets sorted before the date is confirmed rather than argued about afterwards. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Where the side return has been filled in, the old external wall is now an internal one and still carries its render, its gutter line and its old fixings. The day is planned backwards from the hall, and the scribing takes longer than the carry. The slow parts are slow for a reason. Side-return extensions here are frequently a touch out of square where new brickwork meets the old flank wall, so we template the return properly rather than assuming a 90-degree corner.

Terraced fronts with no driveway on most streets and a controlled zone near the station, though the back gardens are long enough that an extension gives us a clear side passage if the builder has not blocked it with materials. Garden routes carry their own hazards: a drain cover, a step up to a patio, wet decking, or a lawn that will not take a loaded trolley. We walk the route with a tape and protect it end to end before the first piece is lifted. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

A galley run down a side-return extension usually measures longer than a slab will give in one length, so a join is designed in from the start rather than discovered. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.