Worktop installation in South Chingford

Yes. South Chingford is on the patch, and the postcodes we work here are E4. It is worked on our east London run, along with the rest of Waltham Forest. Off-street parking means the van stays put all day, so tools, packers and the offcut we would rather have than not are all within reach. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The classic arrangement is the original back room with a later extension bolted onto it, so the kitchen is two ages of building in one room. Access is usually the easy part here, as most of these have a side gate and a back door straight into the kitchen, so we carry down the side alley rather than through the house and keep the mess outside. Walked, measured, protected, then lifted. Side passages here are typically around 900mm, which passes a standard 600mm depth top on edge but not a 1m island slab, so check before planning the route.

Straightforward suburban streets with driveways, crossovers and side passages, so the van parks on the drive and the stone goes down the side of the house. A few post-war estate roads have parking courts with height barriers. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop replacement and worktop templating. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

Two runs meeting at an internal corner is the most common shape we fit, and the corner is where the decisions are. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Unlock and clear the side gate and back door, and move bins, planters and washing lines out of the alley run. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. Floors and units are protected before anything comes through the door, communal or otherwise. Protection goes down first.