Worktop replacement in Vauxhall

Yes. Vauxhall is on the patch, and the postcodes we work here are SW8, SE11. It is worked on our south London run, along with the rest of Lambeth. The realistic answer on a main road is an early slot, a spotter on the van and pieces staged in one movement rather than several trips. We stage the strip-out so the old tops leave in one trip rather than trickling out across the afternoon. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Half-landings mean the back of the house sits at a slightly different level from the front, and a knocked-through kitchen crosses that line. In most Victorian terraces the kitchen sits in the back addition, so you get a narrow galley with one outside wall and nothing square to work off. Units kept, surface changed, one day. Tower kitchens are built to millimetre tolerances against a plasterboard reveal, so template off the finished wall face rather than the carcass line or the top will foul the reveal.

The one-way system and the bus interchange leave almost nowhere to stop, and every tower requires a booked dock slot with a lift induction. Older estate blocks have entryphone access and stairs with a tight quarter turn. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop templating. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A plumber either side of us. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. It is the usual surprise, and it is a known one. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Sound carcasses are the condition.