Worktop installation in Aldborough Hatch

Yes. Aldborough Hatch is on the patch, and the postcodes we work here are IG2. It is worked on our east London run, along with the rest of Redbridge. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Post-war terraces have a short straight hall to the kitchen, which is a good deal kinder than the houses they replaced. The fitting itself is about squaring up to walls that look modern and are not: block or breeze walls with a skim that has been patched over decades, so we still dry-lay and scribe rather than trust the template edge. The slow parts are slow for a reason. The older properties out here have uneven floors, so levelling the base units properly matters more than usual before any stone goes down.

Semi-rural feel with verges, unrestricted parking and generous frontages, so unloading is easy; the older cottages have low door heads and narrow openings that dictate how a slab is carried in. Even an easy kerbside carry wants the pavement clear at the tail lift, because a three-metre piece on edge has a swing radius nobody expects until it is swinging. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly.

A U shape uses more linear metres than people expect, and the two returns rarely nest together, so a second slab is a genuine possibility. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A low sill over the sink run is what decides between an upstand and stone dying into a window board, and there is often less clearance than an upstand is tall. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Unlock any rear or shared path gate and clear both the hall and the back approach so we can choose the better route on the day. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The fitting day is arranged with whoever can actually give us access for the whole slot. One visit, our own installers.