Kitchen worktops in Ashburton

Yes. Estate-built semis and terraces with the original small rear kitchen, usually a 2.6-3m run with a larder recess. Owners here mostly replace worktops and doors rather than move walls, so the units stay and the stone has to work around existing cut-outs. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. Panels come off the van in one trip where possible, since a tall piece handled repeatedly is a piece asking to be chipped. Handling is where these pieces get damaged.

inter-war semi, post-war estate housing, 1960s terrace and low-rise flats. Original quarry-tiled floors sit lower than a later screed, so a run crossing that junction needs the units packed to one level. Access is usually the easy part here, as most of these have a side gate and a back door straight into the kitchen, so we carry down the side alley rather than through the house and keep the mess outside. Walked, measured, protected, then lifted.

Wide roads with verges and unrestricted parking, so the van gets close; most houses have a short concrete path and a low front wall rather than a drive. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

Worktop replacement, worktop installation and worktop splashbacks & upstands, in that order. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Reusing existing carcasses means the old laminate has to come off without wrecking the units, and any belfast sink or overhanging hob needs the cabinet rails checked for level first.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. The units stay, the surface changes. Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.