Worktop templating in Barnes Cray

Yes. Barnes Cray is on the patch, and the postcodes we work here are DA1. It is worked on our south east London run, along with the rest of Bexley. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A templater circling for a space arrives late into a slot that was already tight, and the drawing is what suffers. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The goods lift is generous and the flat entrance often is not, so the tightest point on the route is inside the flat rather than in the building. Where a column, downstand or steel plate lands in the run, the template plots its actual outline so the stone is cut to fit around it instead of being stopped short and filled. Two to three hours, once the units are in. Bathrooms and boilers off the kitchen put pipework in the run, expect notching and awkward cut-outs behind the units.

Flat riverside ground with wide but frequently blocked estate roads and industrial traffic; parking is on-street and generally available. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. Door widths, turn diagonals and any change of level are recorded on the drawing alongside the run dimensions. It goes on the drawing with the run dimensions.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. A kitchen carved out of a larger room sits under whatever the original plan left behind, so the run frequently ends at a blocked doorway or a boxed-in service. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. The room as it is, not as it was drawn.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The template records every angle in that shape as it actually is rather than as the plan drew it. One datum for the whole room. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. It is recorded on the drawing with the run dimensions so the workshop is not guessing. Plotted, not estimated. Units fixed and levelled, all steelwork and brick cleaned, sealed and finished, and any boarded sections completed to final thickness so the template picks up the surface the stone will actually meet. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. The templater needs the sink, tap and hob on site, and a Belfast sink installed at its final height. No stone is cut from a plan.