Reception counters and desks in Becontree

Yes. Becontree is on the patch, and the postcodes we work here are RM8, RM9. It is worked on our east London run, along with the rest of Barking and Dagenham. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. Loading bays belonging to the building are booked by whoever holds the lease, and that is seldom whoever ordered the counter. An early slot buys an empty street and an empty lobby at once. The work comes to you. We template in your kitchen and fit in your kitchen, with nothing to visit or collect.

The kitchen has a door to the hall, a door to the garden and a window over the sink, so the continuous run is short in every direction. These are the counters where the lower transaction shelf earns its keep, because the people served at it are the people the standard was written for, so the knee space and the clear approach to it are checked on site rather than taken off a drawing. Marketing suites get a permanent counter for a temporary lobby. Plaster thickness varies over the height of a wall, so the line at worktop height is not the line at skirting level, and the units decide which one matters. A counter is worse off than a kitchen here, because it usually stands clear of the wall and has nothing behind it to hide a gap. What is out of true gets measured, not talked around.

A step up to a patio or a raised threshold at the back door means the piece is lifted rather than rolled, and that is where the crew size gets decided. A counter top is one long piece with no run of cabinets to break it, so the route decides the join count before the sightlines get a vote. Trestles go up in the lobby before anything is unwrapped. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. The upper counter is the longest piece on the van, so the tail lift needs the full swing radius clear on the pavement. Waiting time on a counter job is the most expensive hour of it.

No, not particularly, and it would be easy to say otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is the local housing talking rather than anything about the job. It is priced, cut and fitted no differently here than anywhere else we cover. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Counters are nearly always one-offs, so the saving that comes from repeating a specification is not usually on the table here. Card reader positions come from the operator, not the architect. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Where an operator is fitting out several receptions, the counters come off one slab run so the desks read as a set rather than as neighbours. Two desks on one site still take two templates.

Corner sinks and corner hobs sit exactly where the joint wants to be, so on an L the cut-out positions get settled before the join positions do. A counter has the same argument in miniature: a straight run nests kindly on a slab, and every return costs yield. Every change of plane is a join waiting to be placed well. The stone is £110 to £550 per square metre supply only, and templating, fabrication and fitting are quoted separately.

Two walls each a degree out give an internal corner two degrees out, and the whole of that error lands in the mitre. What a counter is scribed to is the joiner's carcass rather than the plaster, which is why it is templated after the carcass is fixed and never before. A lobby floor that falls is packed out under the joinery. Tell us the hours the building can be worked in and whether the lobby stays open, and send photographs of every corner so we can find the ducts before we draw. Where the provider has set the specification the material choice was made once for a great many kitchens, and the useful work is meeting it exactly rather than proposing something else on the day. Where a managing agent has to approve the work, the drawing goes out in a form they can sign without ever standing in the lobby. The serving height comes from the standard, not from the landlord.

Stone does not flex, so a run that rocks on its carcasses rocks just as badly once it is stone. Where a run meets an appliance, level decides whether that appliance door still clears the stone above it. Small variation is taken up by packing under the top on the fitting day. A scribe has a working limit, and past twenty millimetres or so the back edge starts eating depth the run cannot spare. A lobby wall that leans shows itself along the back return, so that edge is cut to the line the wall actually takes. Nothing on a counter is corrected with sealant.

If the sink or hob changes after the template, the drawing changes first and nothing is cut meanwhile. The tap hole is drilled in the workshop too, and its position depends on how far the tap has to swing. Undermount bowls are cut and polished in the workshop and dry-fitted to the stone on the bench before anything is loaded. One leg of an L is nearly always the working run and the other little more than a landing space, but both are templated, cut and edged to the same standard. The return between the high counter and the low shelf never nests neatly, and it is what decides how much slab the desk swallows. Shelf depth is set by the knee space underneath it.

An external stair, a side return or a rear garden counts as carry and is measured the same way. A join added to get stone into the room is a different thing from a join added because the slab ran out, and the quote says which is which. Doorways, the newel post and the handrail usually take the room away, rather than the stairs themselves. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. The lower transaction shelf is short and easily handled; it is the upper counter that has to be walked in on edge and turned at every corner. The transaction shelf goes almost anywhere the upper top will not.

Upstand or splashback, the stone is cut from the same slab run as the worktop, at the same time, so the batch actually matches. Ordered later from a different batch, the match is not reliable where the two pieces meet. Both are templated after the worktop is down and settled, because they are cut to the wall itself. Built-in stores and a fuel place beside the back door were standard, and one of them is usually still sitting in the corner of the kitchen. Estates of this kind carry the buildings that serve them: a housing office, a health centre, a community hall, and every one has a counter the public queues at. Concierge desks work as a post room and a security point at once.