Skip to content

Hammersmith and Fulham · SW6

Kitchen worktops in Bishop's Park

Terraces backing toward the river and the park have the usual rear kitchen with side-return infill at 3.2-3.8m, while the mansion flats overlooking the park keep original service kitchens of 2.4-3m with tall ceilings and a deep window reveal. In the riverside blocks the kitchen sits against the core with a peninsula facing the view, so the finished long edge is on show and needs a properly polished exposed end.

  • 5.0from 23 Google reviews
  • 25-year material · 5-year workmanship
  • Fitted 3-7 working days from template

The housing stock

What we are usually working with in Bishop's Park

Victorian terraceEdwardian mansion flatsriverside apartment block1930s purpose-built flats

Terraces backing toward the river and the park have the usual rear kitchen with side-return infill at 3.2-3.8m, while the mansion flats overlooking the park keep original service kitchens of 2.4-3m with tall ceilings and a deep window reveal.

The park and the river path mean several streets are dead ends, so the turning circle for a Luton needs checking rather than assumed. Home fixtures at the nearby football ground close roads and suspend parking across the streets between the river and Fulham Palace Road, which rules out those days entirely. Plenty of dead-end streets here, so check the van can turn round before it goes in loaded - reversing 100m with an A-frame is nobody's idea of a good start. In the riverside blocks the kitchen sits against the core with a peninsula facing the view, so the finished long edge is on show and needs a properly polished exposed end.

The stock behind these kitchens runs to Victorian terrace, Edwardian mansion flats, riverside apartment block and 1930s purpose-built flats. Which of those you have decides most of what follows.

The kitchen normally sits in the back addition or a later side return, which puts the run against the oldest and least straight wall in the building. Two to three hours on site, once the units are fitted, fixed and level. The room as it is, to the millimetre.

The addition wall is half a brick thick in places and has usually had a damp course injected and been re-plastered, which leaves it neither flat nor consistent. Victorian party walls and chimney-breast returns bow along their length, so the template plots the real line rather than assuming a straight one - the template picks up points every few hundred millimetres down the back of the run and the drawing carries that curve through to the saw. No stone is ever cut from a plan.

External walls are thick and the run under the window sits in a deep reveal that has to be templated rather than assumed square. A mansion block is a logistics job before it is a stone job. Units kept, surface changed, one day.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. The template records every angle in that shape as it actually is rather than as the plan drew it. The drawing leaves site complete.

Access. Home fixtures at the nearby football ground close roads and suspend parking across the streets between the river and Fulham Palace Road, which rules out those days entirely. The park and the river path mean several streets are dead ends, so the turning circle for a Luton needs checking rather than assumed.

At a glance

Borough
Hammersmith and Fulham
Postcodes
SW6
Covered on
our west London run
Lead time
3–7 working days from template

There is nothing to visit in Bishop's Park. Samples are posted free, the template is taken in your kitchen and the stone is fitted there too.

Questions

Working in Bishop's Park

Do you fit kitchen worktops in Bishop's Park?

Yes. Terraces backing toward the river and the park have the usual rear kitchen with side-return infill at 3.2-3.8m, while the mansion flats overlooking the park keep original service kitchens of 2.4-3m with tall ceilings and a deep window reveal. In the riverside blocks the kitchen sits against the core with a peninsula facing the view, so the finished long edge is on show and needs a properly polished exposed end. Streets near a ground or a venue have restrictions that come and go with the fixture list rather than with the time of day. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause.

What kind of kitchens do you usually work on in Bishop's Park?

Victorian terrace, Edwardian mansion flats, riverside apartment block and 1930s purpose-built flats. Where the side return has been filled in, the old external wall is now an internal one and still carries its render, its gutter line and its old fixings. Alcoves either side of the breast are rarely the same width and rarely parallel, so each one is templated as its own piece with its own scribe. Recorded as it is, not as it was drawn.

Is access difficult in Bishop's Park?

Home fixtures at the nearby football ground close roads and suspend parking across the streets between the river and Fulham Palace Road, which rules out those days entirely. The park and the river path mean several streets are dead ends, so the turning circle for a Luton needs checking rather than assumed. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. The template records it along with everything else.

What do you get asked for most in Bishop's Park?

Worktop installation, worktop replacement and worktop templating, in that order. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Plenty of dead-end streets here, so check the van can turn round before it goes in loaded - reversing 100m with an A-frame is nobody's idea of a good start.

What decides the price of a worktop in Bishop's Park?

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. A layout templated off one wall instead of one datum will not sit right once all the pieces are down together. One datum for the whole room. Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Do you work in flats and leasehold properties in Bishop's Park?

The same building type can arrive as a careful one-off kitchen or as a fast turnaround, and the honest answer is that they are priced differently. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.

Next step

Get your Bishop's Park kitchen priced

Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.

25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.

+44 7830 847489