Worktop installation in Botany Bay

Yes. Botany Bay is on the patch, and the postcodes we work here are EN2. It is worked on our north London run, along with the rest of Enfield. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A range or an Aga in an original recess is usually immovable, so the run is designed around it and the clearances come from the appliance. What costs time is the distance from where the van can park to the door, often down a long drive or across gravel, so we plan the carry with enough hands and board the route where it crosses gravel or lawn. That is the shape of the day. Range cookers in these houses sit in a masonry recess that is never square - template the two flanking tops individually with a tolerance gap, do not assume a symmetrical opening.

Narrow lanes with no pavement, no lighting and passing places only, plus horses and farm traffic. A long-wheelbase van fits but reversing out is not an option, so turning space has to be confirmed first. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop design & quotation. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Nothing is bonded until the whole run sits flat. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Give us the hardest, shortest approach to the door you can, clear of parked cars, and warn us of any soft ground, steps or gravel on the route. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. Floors and units are protected before anything comes through the door, communal or otherwise. One visit, our own installers.