Worktop templating in Brentford

Yes. Brentford is on the patch, and the postcodes we work here are TW8. It is worked on our west London run, along with the rest of Hounslow. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A templater circling for a space arrives late into a slot that was already tight, and the drawing is what suffers. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Original brickwork is uneven by ten millimetres or more across a bay, so the back edge is scribed to the actual face rather than to a line. Exposed brick and steel is the whole job here: the brick face is not a flat plane, it moves in and out over its height and along its length, so the scribe is taken at the exact height the worktop will sit rather than off the wall generally. No stone is ever cut from a plan. Apartment specs here routinely ask for matching window boards and upstands from the same slab, so measure the sill runs at template or you are back for a second visit.

The High Street one-way system and the Great West Road make the approach straightforward, but the riverside blocks need goods-lift booking and long trolley routes up from an underground car park. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Door widths, turn diagonals and any change of level are recorded on the drawing alongside the run dimensions. That is part of what the visit is for.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation, worktop replacement and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. Two to three hours on site, with the sink, tap and hob physically present. The room as it is, not as it was drawn.

The free end is what needs deciding early: square edge, mitred apron down the end, or a full waterfall to the floor, and a waterfall is cut in sequence off the same part of the slab. The template records every angle in that shape as it actually is rather than as the plan drew it. One datum for the whole room. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A low sill over the sink run is what decides between an upstand and stone dying into a window board, and there is often less clearance than an upstand is tall. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Measured at worktop height, nowhere else. Units fixed and levelled, all steelwork and brick cleaned, sealed and finished, and any boarded sections completed to final thickness so the template picks up the surface the stone will actually meet. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come.