Worktop replacement in Brentford

Yes. Brentford is on the patch, and the postcodes we work here are TW8. It is worked on our west London run, along with the rest of Hounslow. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. Old tops out and new stone in, both through the same gap. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Steel columns and downstands land where the frame put them, which is frequently in the middle of what would otherwise be a clean run. Many of these kitchens are island pods in the middle of an open plan with waste and feeds coming up through the floor, so the island cannot be nudged to suit the stone and the stone gets cut to suit the island. What is under the old top is the real question. Apartment specs here routinely ask for matching window boards and upstands from the same slab, so measure the sill runs at template or you are back for a second visit.

The High Street one-way system and the Great West Road make the approach straightforward, but the riverside blocks need goods-lift booking and long trolley routes up from an underground car park. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

It is one of the three we do most here, behind worktop installation. Same template visit, same workshop, same installers either way. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. Old tops out in the morning, new stone down and sealed the same afternoon. A day, not a project.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. Carcasses have to be sound first. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A low sill over the sink run is what decides between an upstand and stone dying into a window board, and there is often less clearance than an upstand is tall. We would rather find it at template than on the morning, which is why the templater looks behind the units. Found at template, not on fit day. Book the goods lift and loading bay for the day, clear a straight route through the open plan, and have a plumber on hand for the island services coming up through the floor. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Plumber either side of us.