Worktop installation in Chalk Farm

Yes. Chalk Farm is on the patch, and the postcodes we work here are NW1, NW3. It is worked on our central and north London run, along with the rest of Camden. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rooms are small and stacked over three levels, and the staircase is the tightest thing in the building. Getting in is straightforward, so the day is spent dry-laying and scribing to walls that have never been straight. The slow parts are slow for a reason. In a mews cottage the door width and the 90-degree turn just beyond it decide every piece size, so walk the swept path with a board before committing to a one-piece top.

Streets around the railway bridges are narrow with sharp corners and the CPZ leaves almost no loading space, while Chalk Farm Road itself is bus lanes and market overspill. Mews cottages have a single narrow door straight off the cobbles and an immediate turn into the kitchen. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Alcove pieces get cut oversize on both scribe edges, with the true wall angles carried on the template drawing rather than assumed. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Give us the hardest, shortest approach to the door you can, clear of parked cars, and warn us of any soft ground, steps or gravel on the route. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.