Worktop fabrication in Chalk Farm

Yes. Chalk Farm is on the patch, and the postcodes we work here are NW1, NW3. It is worked on our central and north London run, along with the rest of Camden. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Mews are cobbled and tight, so a long-wheelbase van may not get down at all and the carry starts at the entrance to the mews. The joins here are chosen rather than forced, so they go where the veining and the gables want them. Every join over a gable, clear of every cut-out. In a mews cottage the door width and the 90-degree turn just beyond it decide every piece size, so walk the swept path with a board before committing to a one-piece top.

Streets around the railway bridges are narrow with sharp corners and the CPZ leaves almost no loading space, while Chalk Farm Road itself is bus lanes and market overspill. Mews cottages have a single narrow door straight off the cobbles and an immediate turn into the kitchen. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. The maximum piece length is fixed at drawing stage and every join is placed over a cabinet gable from there. The drawing carries that decision through to the saw.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. So the nesting is planned around it rather than around a standard kitchen. Nested for the job in front of us. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Pieces are dry-assembled and checked on the bench before anything is loaded. Same slab run, or it is not a match.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. A join that lands in the wrong place cannot be moved once the cut-outs are machined, so it is settled on the drawing. That is nested before any glass goes on the saw. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. Cut it square where it should be radiused and the piece will fail on the lift, not in the kitchen. The drawing decides it, not the fitter. The range or Aga, the sink and the tap all need to be confirmed by model before nesting, because their clearances and hole positions set where the island can be cut. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Changing an appliance after the nest is set means recutting the piece, not adjusting it. The approved drawing is the instruction.