Kitchen worktops in Church End

Yes. A lot of small interwar cottage-estate kitchens, typically 2.4m of run against one wall with a back door taking out the corner, plus tower-block flats with fixed galley layouts that cannot be moved because the services are in a duct. Refits keep the footprint and change the surfaces. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause.

interwar cottage estate, 1960s-70s tower and slab block and Victorian terrace. Kitchens are compact and standardised, which makes the fixed template, fabrication and fitting lines a larger share of the total than the stone. The plaster is bonded straight onto the concrete, so the bottom course of tiles tends to bring plaster with it when the old top comes off, leaving a rough band behind the upstand. Sound carcasses are the one condition.

The cottage estates have front paths and no drives; the towers mean a single passenger lift, a booking with the housing office, and often a stair contingency if the lift is out. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Worktop replacement, worktop templating and worktop splashbacks & upstands, in that order. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. Units fitted, fixed and level first. In the blocks the pipe duct and the meter cupboard fix the layout, so measure the actual clear width between them rather than the nominal unit sizes.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Carcasses have to be sound first. Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. Plotted, not estimated. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The template happens when the units are in, fixed and level, whoever is fitting them. Fitted, fixed and level, then we come. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.