Worktop replacement in Deptford

Yes. Deptford is on the patch, and the postcodes we work here are SE8. It is worked on our south east London run, along with the rest of Lewisham. Where an event closes the road entirely, the van cannot be moved once it is in, which is a different problem from not being able to park at all. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. It is a full day at the kerb, not a delivery. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Cornice, picture rails and deep skirting survive in converted rooms, so the run stands off the wall and the back edge follows the units rather than the plaster. Lath-and-plaster and bowed brickwork mean we template for scribes rather than straight cuts, and each piece is offered up and eased in rather than dropped straight down. What is under the old top is the real question. Height barriers over the estate car parks catch people out, check the van clears them or you're carrying from the road.

Congested narrow streets, market days closing the high street, estate parking courts with height barriers, and riverside blocks that need a booked lift and loading bay. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop fabrication. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Old tops out in the morning, new stone down and sealed the same afternoon. Sound carcasses or it does not go ahead. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

A galley puts the sink on one side and the hob on the other, which spreads the cut-outs across two pieces instead of weakening one. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Have a plumber booked to disconnect the sink, tap and waste first thing and reconnect after we have gone, and clear the hallway and stairs completely so we can carry slabs through the house. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Plumber either side of us.