Worktop installation in Foots Cray

Yes. Foots Cray is on the patch, and the postcodes we work here are DA14. It is worked on our south east London run, along with the rest of Bexley. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Floors are suspended timber over a shallow void and have moved, so the units are packed and levelled before anything is set on them. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. The slow parts are slow for a reason. The older cottages near the river have settled floors, level the units off a datum line, not off the floor.

The main road through is busy and narrow with the river bridge as a pinch point; the estate sections have parking courts and rear pathways and the cottages have no off-street parking at all. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A junction between an original floor and a later extension slab is almost never at the same level, so units carrying a run across it need packing first. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Eased in, never forced. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.