Worktop installation in Globe Town

Yes. Globe Town is on the patch, and the postcodes we work here are E2. It is worked on our east London run, along with the rest of Tower Hamlets. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A maisonette puts the kitchen on one of two levels, so an internal staircase may be part of the route as well as the communal one. The stairwell half-landing is usually the tightest point on the whole route and it dictates the maximum piece. Walked, measured, protected, then lifted. Deck-access flats are a two-man carry every time, so pieces get sized to what will physically turn into the door rather than what looks best on paper.

Balcony-access blocks mean carrying stone along an open deck and through a 760mm front door, and the older walk-ups have no goods lift at all. Street parking is CPZ-controlled and the estate roads have height barriers on the parking courts, so the van usually sits on the main road and the slab is carried in. Where the parking court sits behind the block the carry crosses open ground and gets boarded, because loaded trolleys and block paving do not agree. We walk the route with a tape and protect it end to end before the first piece is lifted. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. The join is the last thing finished. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. The back edge is eased in progressively rather than offered up once and forced. Dry-lay, mark, cut, then bond. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. One visit, our own installers.