Worktop installation in Bethnal Green

Yes. Bethnal Green is on the patch, and the postcodes we work here are E2. It is worked on our east London run, along with the rest of Tower Hamlets. A controlled parking zone means either a visitor permit sorted in advance or a suspended bay, and a suspension is applied for days ahead rather than on the morning. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Where the side return has been filled in, the old external wall is now an internal one and still carries its render, its gutter line and its old fixings. The day is planned backwards from the hall. That is the shape of the day. Half the terraces here have been through two or three refits and the rear walls are out of square by 15-20mm, so nothing gets cut off drawings without a physical template.

Terraced streets are permit-only Monday to Friday with no forecourts, and Columbia Road and its feeder streets are effectively closed by the Sunday flower market, so schedule around it. The 1890s tenement blocks have winding stone stairs, no lift and half-landing turns that a full 3m piece will not pass, so plan for a joint or a hoist. Stone goes up on edge, and it is the half-landing turn rather than the flight itself that sets the maximum piece. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. One visit, with the sink and hob seated and sealed before we leave. One visit, done properly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. Sealed before we leave.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.