Worktop installation in Brick Lane

Yes. Brick Lane is on the patch, and the postcodes we work here are E1. It is worked on our east London run, along with the rest of Tower Hamlets. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The structure below is commercial, so the floor is often timber over a shop ceiling and the load path under an island is worth thinking about. Access is generally through the front door and a short straight hall into the kitchen, which is a good deal kinder than a Victorian terrace, though rear access through a back garden or shared path is often the better route if it exists. The slow parts are slow for a reason. Above-shop flats mean everything gets planned in short jointed sections, and the stair, not the kitchen, sets the maximum piece size.

The street itself has heavy footfall from late morning until late at night, so realistically deliveries happen early and the van cannot sit for long. Flats above commercial units are reached by a separate side door and a very steep single-width stair, with no lift and no chance of turning a long piece at the top. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. The fitting day is planned backwards from that point, before anything comes off the van. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The fitting day is scheduled to suit that rather than to suit the diary. Sealed before we leave. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. The back edge is eased in progressively rather than offered up once and forced. It is the slow part of the day and it should be. Unlock any rear or shared path gate and clear both the hall and the back approach so we can choose the better route on the day. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.