Worktop installation in Havering-atte-Bower

Yes. Havering-atte-Bower is on the patch, and the postcodes we work here are RM4. It is worked on our east London run, along with the rest of Havering. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A small room puts the sink, hob and tap cut-outs close together on one short length, and the bridge of stone left between them decides whether it can be cut in one piece. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. That is the shape of the day. The lanes up to the village are steep and tight, so we work off a smaller vehicle for the final leg when the slab size allows it.

Narrow rising lanes with few passing places and no pavements in stretches, but once on the property there is ample drive space and no restrictions. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop templating, worktop design & quotation and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. A layout that has been packed and levelled run by run instead of to one datum shows as a step where two pieces meet. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. One visit, our own installers.