Worktop installation in Harold Hill

Yes. Harold Hill is on the patch, and the postcodes we work here are RM3. It is worked on our east London run, along with the rest of Havering. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. The day is built around that window. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Many have been extended at the rear since being sold, so the kitchen is half original and half newer with a floor junction between the two. The carry is the constraint. Walked, measured, protected, then lifted. Original walls on this estate are rarely straight or true, so the scribe allowance goes up and we never cut a return to a nominal dimension.

Open estate roads with verges, front gardens and generally unrestricted parking, plus rear pathways between blocks, so unloading is rarely the problem here. Everything comes through the front door and down the hall, so the tightest point on the route is usually the newel post at the foot of the stairs. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. The prep list is not optional.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a corner is a couple of degrees off, a mitre cut to a theoretical ninety degrees opens on the wall side and there is no closing it afterwards. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Reserve a space as close to the block entrance as possible and clear the landing and stairs of prams, bikes and stored items. Consent for the work sits with the freeholder or the managing body, and getting it in writing first avoids a crew arriving to a locked door. Floors and units are protected before anything comes through the door, communal or otherwise. Access for the whole slot, or a different day.