Kitchen worktops in Heath Park

Yes. Comfortable inter-war semis between Romford and Hornchurch, most with the kitchen opened into the dining room and a modest rear extension, producing a long single wall run with a narrow island opposite. Quartz in a plain mid-grey with a 30mm edge is the default here and most jobs include matching window sills. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Panels come off the van in one trip where possible, since a tall piece handled repeatedly is a piece asking to be chipped. Handling is where these pieces get damaged.

1930s semi, 1930s detached and post-war infill. A detached house of this age has a drive, a side path and a back door, so access is rarely the constraint and the design can follow the room. These kitchens are nearly always retiled at least twice, and stripping the old tiles takes the bottom course of plaster with it because the original laminate top ran underneath the tiles rather than up to them. The wall makes that decision, not the brochure.

Ordinary suburban streets, generally with a crossover and space for one car on the front, but the roads are narrower than the Gidea Park side and a van on the kerb blocks a lane. The van gets close to the door and the stone comes off the tail lift onto a trolley, which is about the shortest carry we ever get. It is usually the full-height panels rather than the tops that will not make the turn, and that only shows up when they arrive. Joint positions follow from that.

Worktop installation, worktop replacement and worktop splashbacks & upstands, in that order. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Window sills in stone are asked for on most jobs here, so we measure the reveal depth at template, the recesses in these houses vary house to house.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Long runs almost never take a single panel, so the joint positions want agreeing before anything is templated. Corners get their own pieces. Sill height gets settled with the template on site, because it is one of the few dimensions nobody has measured before we arrive. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. The fitting day is arranged with whoever can actually give us access for the whole slot. Protection goes down first. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.