Worktop templating in King's Cross

Yes. King's Cross is on the patch, and the postcodes we work here are N1C, N1, NW1. It is worked on our central and north London run, along with the rest of Camden. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Infill plots usually put the kitchen at the back with wide doors to a small garden, and that opening is the best route in. The template records that corner as it is, so the mitre closes tight instead of being cut to a theoretical 90 degrees. Two to three hours, once the units are in. New-build units are square and level, so the job is logistics and protecting finished floors rather than scribing, and the real risk is damaging a communal lobby rather than mis-cutting a top.

Estate management with booked loading bays, service lifts and delivery windows, which is straightforward if you book it and impossible if you do not. The surrounding roads including Euston Road and Pentonville Road are red routes with no stopping. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. A template taken without walking the route produces a drawing that cuts beautifully and will not go in. It goes on the drawing with the run dimensions.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop installation, worktop fabrication and worktop design & quotation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. Two to three hours on site, with the sink, tap and hob physically present. Units fitted, fixed and level first.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The template records every angle in that shape as it actually is rather than as the plan drew it. Real angles, not plan angles. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. It is recorded on the drawing with the run dimensions so the workshop is not guessing. Measured at worktop height, nowhere else. Boards taped or skimmed and finished, units fixed back to the wall and levelled off, and the appliances on site - the wall must be at its final thickness on template day, so no tiler or splashback fitter gets ahead of the worktop. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. A template booked hopefully around another trade is the commonest cause of a wasted visit. Fitted, fixed and level, then we come.