Kitchen worktops in Mitcham

Yes. The stock is genuinely mixed, so jobs range from a Victorian terrace near the Cricket Green having its back addition opened up, to estate flats where the kitchen is a fixed 2.1m by 3m box that only takes a straight run and a return. Buy-to-let refits with standard-depth units are a large share of the work. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is.

Victorian terrace, 1930s semi, Postwar estate block and 1970s maisonette. The back addition is a narrow two-storey outrigger with a single external wall, and the kitchen galley runs the length of it. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. That is the shape of the day.

Parking is largely uncontrolled away from the tram stops, which helps, but the estates have communal entry systems and shared stairs with landings too tight to turn a full-length slab. London Road and Streatham Road are slow, so timed slots need padding. Weight tells on a staircase more than anywhere else, because there is nowhere to set a piece down mid-flight and no way to change your grip once it is moving. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

Worktop replacement, worktop installation and worktop splashbacks & upstands, in that order. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Ordered later from a different batch, the match is not reliable exactly where the pieces meet. Same batch, same run, same day. Estate kitchens frequently have a service duct boxed into a corner, and it is almost never square, cut the notch on site rather than from the drawing.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. A 100mm upstand is the low-maintenance answer, and full-height stone is the one that has to be committed to early. Same slab run as the tops. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.