Kitchen worktops in Pollards Hill

Yes. The estate housing was built on a Radburn layout with pedestrian frontages, and the kitchens are standardised, a 2.4m run plus a short return, with a serving hatch to the living room that owners often close up to gain wall space. Sizes repeat closely across whole blocks. A front drive is the best thing that can happen to a fitting day, because the tail lift comes down within a few metres of the door and nothing is on a clock. Splashbacks are normally the last thing off, so a short parking window is exactly when they get rushed. Handling is where these pieces get damaged.

1960s and 70s low-rise estate housing, Interwar semi and Postwar terrace. Rear access through a garden or a shared path means long pieces can usually come in whole from the back. The rear kitchen wall in ex-council flats and maisonettes is commonly dense in-situ concrete or blockwork with a thin skim, which means mechanical fixings are hard work and the splashback is held on adhesive rather than screwed. The wall makes that decision, not the brochure.

Cars park in courts and garage blocks set away from the front doors, so almost every job here involves a long carry along footpaths and through pedestrian alleys. Two-man handling with a slab trolley matters more than van proximity. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. Splashback panels are lighter than a worktop and far more awkward, because a tall thin piece has to be carried on edge and cannot be tilted to clear a turn. Joint positions follow from that.

Worktop replacement, worktop installation and worktop splashbacks & upstands, in that order. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Closed-up hatches leave a shallow patch of new plasterboard right where the upstand lands, so fix through to the original blockwork rather than into the patch.

An L can be mitred at the corner for a continuous look or butt-jointed over the gable, and the two are different money and different risk. The same shape decides where splashback pieces break, and a joint in a corner reads as a detail while one in a clear run reads as a mistake. Joint placement is a decision, not an accident. A lightweight stud partition will not carry a breakfast bar or a peninsula end, and stone finds that out faster than laminate ever did. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where a landlord or housing provider is involved there is a specification to meet and a process to follow, and both are settled before a date is offered. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.