Worktop templating in Northolt

Yes. Northolt is on the patch, and the postcodes we work here are UB5. It is worked on our west London run, along with the rest of Ealing. A free-parking street with cars both sides can still leave the van forty metres away, and that distance is carry, not driving. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A maisonette puts the kitchen on one of two levels, so an internal staircase may be part of the route as well as the communal one. Unit height is the other issue: legs sit on an uneven screed or hard concrete with no give, so the template reads the top of every carcass rather than assuming they share a height. Recorded as it is, not as it was drawn. The cupboard-in-the-corner layout leaves a short return under 700mm that still needs its own template and its own polished end, so it is never quite as quick as it looks.

Estate roads with parking courts, bollards and narrow service alleys behind the terraces. The approach is off the A312 at the Target roundabout or down from the A40. Sign-in at the gate, a permit on the dash and a named contact are usually wanted before anything comes off the van. Door widths, turn diagonals and any change of level are recorded on the drawing alongside the run dimensions. The template records it along with everything else.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The template visit is booked once the units are genuinely in, not when they are nearly in. The room as it is, not as it was drawn. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Two to three hours on site, with the sink, tap and hob physically present. Appliances on site, not on order.

The return piece is the awkward one on a slab: short, full depth, and rarely nesting neatly against the long lengths, so yield rather than area is what moves the material figure. Join positions and vein direction are marked on the template drawing before it leaves site. One datum for the whole room. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. The template plots it as it is, at the exact height the worktop will sit, and the drawing carries that through. Plotted, not estimated. Every base unit fixed to the wall, packed and levelled, and any dry-lining or patching completed - the template reads the wall face it is given, so that has to be the finished face. These kitchens tend to be compact and reasonably square, so the fixed template, fabrication and fitting lines are a larger share of the total than the stone is. A template booked hopefully around another trade is the commonest cause of a wasted visit. No stone is cut from a plan.