Worktop fabrication in Roe Green

Yes. Roe Green is on the patch, and the postcodes we work here are NW9. It is worked on our north west London run, along with the rest of Brent. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Where unloading has to happen in one go, the load order is planned so nothing has to come off twice. It is decided in the yard, not at the kerb. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

A range or an Aga in an original recess is usually immovable, so the run is designed around it and the clearances come from the appliance. Islands here regularly run longer than a slab, so the join is nested to sit over an internal gable and positioned so it does not run through the hob cut-out, and on a heavily veined stone we nest the island and the back run together so the movement relates across the room. The bench proves it before the van moves. Short runs in a conservation cottage leave no room for error, so a template of the actual opening beats any drawing of nominal unit widths.

Narrow lanes, grass verges and shared front paths through the conservation area, with limited parking and no driveways on the original cottages, so the carry is on foot across grass and paving. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. Getting that wrong leaves a finished, machined piece that cannot reach the room, which is a remake rather than a trim. The drawing carries that decision through to the saw.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop templating, worktop replacement and worktop design & quotation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Same slab run, or it is not a match. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. So the nesting is planned around it rather than around a standard kitchen. Proven on the bench before dispatch.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. The nest is laid out around that, with joins placed over cabinet gables and kept clear of every cut-out. The bench proves it before the van does. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a run finishes into a reveal, the depth of that reveal is taken at worktop height and nowhere else. Cut it square where it should be radiused and the piece will fail on the lift, not in the kitchen. The drawing decides it, not the fitter. The range or Aga, the sink and the tap all need to be confirmed by model before nesting, because their clearances and hole positions set where the island can be cut. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. The approved drawing is the instruction.