Kitchen worktops in Selhurst

Yes. Terraced and semi-detached stock with modest rear kitchens, mostly straight runs of 2.7-3.2m with the boiler and the back door competing for the same wall. A lot of tenanted properties, so hard-wearing finishes and simple layouts rather than islands. Where an event closes the road entirely, the van cannot be moved once it is in, which is a different problem from not being able to park at all. Splashbacks are normally the last thing off, so a short parking window is exactly when they get rushed. Handling is where these pieces get damaged.

Victorian terrace, Edwardian semi, post-war infill and converted flats. The flat entrance door and the internal doorways are usually tighter than the communal stairs, which is the opposite of what most people assume. In most Victorian terraces the kitchen sits in the back addition, so you get a narrow galley with one outside wall and nothing square to work off. Units kept, surface changed, one day.

Match-day traffic and parking restrictions around the stadium close streets off at short notice, and the rest of the time the terraces have no off-street parking at all. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. The strip-out is planned around it.

Worktop replacement, worktop splashbacks & upstands and worktop templating, in that order. Conversions put kitchens where the services could be made to reach rather than where they belong, so runs are short and interrupted. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. We check the fixture list before booking a fit here, because a Saturday delivery on a home game day means the van will not get down the street.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. The template records every angle in that shape as it actually is rather than as the plan drew it. One datum for the whole room. Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. Found at template, not on fit day. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. A replacement keeps the units and changes the surface, which is the least disruptive way to do this in an occupied property. Sound carcasses are the condition. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.