Kitchen worktops in Croydon Town Centre

Yes. Almost entirely flats. Kitchens are compact open-plan corners of a living space, typically a 2.4-3m run with an integrated hob, a slim peninsula and no room for a separate utility. Office conversions often have very deep floorplates with the kitchen against an internal wall and no window at all. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. Splashbacks are normally the last thing off, so a short parking window is exactly when they get rushed. Handling is where these pieces get damaged.

high-rise apartment tower, office-to-residential conversion, 1960s block and new-build development. Kitchens are compact and standardised, which makes the fixed template, fabrication and fitting lines a larger share of the total than the stone. The plaster is bonded straight onto the concrete, so the bottom course of tiles tends to bring plaster with it when the old top comes off, leaving a rough band behind the upstand. Units kept, surface changed, one day.

Concierge desks, booked service lifts, loading bays with 30-minute limits and no parking anywhere near the entrance. Everything is scheduled around the building's delivery hours. Piece length is set by the internal diagonal of the lift car, not by the length of the slab. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. It sets what the day actually looks like.

Worktop replacement, worktop templating and worktop splashbacks & upstands, in that order. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Ordered later from a different batch, the match is not reliable exactly where the pieces meet. Same batch, same run, same day. In tower blocks the lift car dimension sets the maximum piece, and if the goods lift is out we are not carrying stone up twenty floors, so the fit gets rebooked rather than improvised.

Because a peninsula is seen from both sides, the underside of any overhang gets the same edge treatment as the top, which is easy to leave out of a spec. The template records every angle in that shape as it actually is rather than as the plan drew it. One datum for the whole room. Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.

Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. Full-height panels need the wall made good first, which is another trade and another timescale. Same slab run as the tops. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.