Worktop installation in South Bank

Yes. South Bank is on the patch, and the postcodes we work here are SE1. It is worked on our south London run, along with the rest of Lambeth. Underground loading has a height restriction, and a van with an A-frame on it is taller than the driver remembers. We aim for the first slot of the day where parking is tight, because that is when the street is emptiest. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Houses on modern estates are built to a handful of standard plans, so the kitchen is square, predictable and modest in area. Everything comes up in the lift, so we measure the lift car's internal diagonal before the piece is loaded, because a car that takes 2.4m on the diagonal will not take a 3m worktop no matter how you stand it. Walked, measured, protected, then lifted. Buildings here have strict rules on wet cutting and dust, so any on-site adjustment needs extraction and a sheeted area agreed with building management in advance.

Everything moves through a service entrance with a booked goods lift, a signed-in delivery window and often a restriction on working before 9am or after 5pm. Riverside frontages have no vehicle access at all, so the loading dock is at the back of the building. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. The fitting day is planned backwards from that point, before anything comes off the van. It gets checked before the first piece is lifted.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Upgrading a builder-finish kitchen is mostly a swap, so the cost sits in the material choice rather than in the shape of the room. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Developer-fitted kitchens come with thin cam-lock carcasses, which are fine under laminate and want bracing before stone goes on them. One visit, with the sink and hob seated and sealed before we leave. The prep list is not optional.

On a heavily veined stone the island and the run behind it are nested off the same area of slab so the movement relates across the room. Joins are pulled with suction clamps and finished flush, then colour-matched, which is the last thing done rather than the first. Nothing is bonded until the whole run sits flat. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Where a partition has been built off the floor screed rather than off the slab, it moves, and a mitre bonded across that corner is the first thing to open. On the day it means dry-laying, marking, and cutting the scribe on site before anything is bonded. Dry-lay, mark, cut, then bond. Book the service lift and loading bay with the building manager for the whole fitting window, and have the fob or key for lift override ready. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.