Worktop replacement in South Ruislip

Yes. South Ruislip is on the patch, and the postcodes we work here are HA4. It is worked on our west London run, along with the rest of Hillingdon. Enforcement zones rarely accept a trade van unloading stone as an exemption, so this gets sorted before the date is confirmed rather than argued about afterwards. A replacement is a two-way job, with old tops going out and new stone coming in, so the van needs to stay put across the whole day. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Original quarry-tiled floors sit lower than a later screed, so a run crossing that junction needs the units packed to one level. What catches people out is the junction between the old floor and the extension floor, which is rarely at the same level, so a run carrying across it needs the units packed before stone goes on. What is under the old top is the real question. Traffic dust off the A40 makes on-site cutting a nuisance, so everything comes prefabricated and gets dry-fitted before anything is fixed.

The A40 Western Avenue makes delivery quick, but the station area has controlled parking and the newer blocks need lift booking through a managing agent. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop fabrication and worktop installation. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The carcasses have to be sound, because stone is several times the weight of what is coming off. A day, not a project.

Three runs means two internal corners, and each corner is a decision about mitre or butt joint before anything is nested. The existing layout is being kept, so the question is whether the old carcasses will take stone in that shape without more support. Height change is checked before we cut. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The returns into a breast recess are the tightest scribes in the room, and they are eased in rather than forced. This is the commonest reason a replacement turns out to need more than a straight swap. The laminate has been covering it up. Unlock the side gate and clear the alley of bins, bikes and pots, and arrange a plumber for the sink and an electrician if the hob is hard-wired. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Plumber either side of us.