
Lewisham · SE8 SE4
Kitchen worktops in St Johns
Modest Victorian terraces and some larger semis caught between the railway lines; kitchens are usually the back addition at 2.2m to 2.8m wide, and narrow plots limit side returns so most jobs stay inside the original footprint.
- 5.0from 23 Google reviews
- 25-year material · 5-year workmanship
- Fitted 3-7 working days from template
The housing stock
What we are usually working with in St Johns
Modest Victorian terraces and some larger semis caught between the railway lines; kitchens are usually the back addition at 2.2m to 2.8m wide, and narrow plots limit side returns so most jobs stay inside the original footprint. Railway viaducts and changes of level carve the area into pockets with few through routes, and parking is permit-controlled; short carries, awkward navigation.
Narrow plots mean side returns rarely happen, most of the work here is making a 2.4m galley work harder.
What turns up on the job sheets is Victorian terrace, Victorian semi-detached villa, 1970s low-rise estate and 1990s infill. The differences between them show up at template, not at enquiry.
Lath and plaster, a settled floor and a hall with a turn in it are the three things that decide how this job runs. All of that is settled at the nesting stage, because a machined piece cannot be adjusted afterwards. The drawing decides it before the saw does.
A long piece has to come through the front door, down the hall, round the newel post and through a doorway with a step down into the addition. What the old top has been hiding is usually a floor that settled towards the back and units that were never fixed back to the wall. Sound carcasses are the one condition.
A controlled parking zone means either a visitor permit sorted in advance or a suspended bay, and a suspension is applied for days ahead rather than on the morning. Where unloading has to happen in one go, the load order is planned so nothing has to come off twice. The load plan follows from it.
Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. So the nesting is planned around it rather than around a standard kitchen. Proven on the bench before dispatch.
Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. The workshop works from the approved drawing, so whoever signs it off is signing off the join positions too. The approved drawing is the instruction.
Access. Railway viaducts and changes of level carve the area into pockets with few through routes, and parking is permit-controlled; short carries, awkward navigation.
At a glance
- Borough
- Lewisham
- Postcodes
- SE8, SE4
- Covered on
- our south east London run
- Lead time
- 3–7 working days from template
There is nothing to visit in St Johns. Samples are posted free, the template is taken in your kitchen and the stone is fitted there too.
Services
What we do in St Johns
Six services, ordered by what St Johns's housing stock actually asks for most.
Nearby
We also work around St Johns
Questions
Working in St Johns
Do you fit kitchen worktops in St Johns?
Yes. Modest Victorian terraces and some larger semis caught between the railway lines; kitchens are usually the back addition at 2.2m to 2.8m wide, and narrow plots limit side returns so most jobs stay inside the original footprint. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. It rarely changes what we cut, but it does change how the pieces are stacked and strapped for the run out. It is decided in the yard, not at the kerb.
What kind of kitchens do you usually work on in St Johns?
Victorian terrace, Victorian semi-detached villa, 1970s low-rise estate and 1990s infill. The addition wall is half a brick thick in places and has usually had a damp course injected and been re-plastered, which leaves it neither flat nor consistent. In most Victorian terraces the kitchen sits in the back addition, so you get a narrow galley with one outside wall and nothing square to work off. Units kept, surface changed, one day.
Is access difficult in St Johns?
Railway viaducts and changes of level carve the area into pockets with few through routes, and parking is permit-controlled; short carries, awkward navigation. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. With no room to turn, the old top gets cut up in the kitchen instead, which is dusty work and needs the room emptied first. The strip-out is planned around it.
What do you get asked for most in St Johns?
Worktop replacement, worktop templating and worktop fabrication, in that order. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Cutting several kitchens from different slabs and calling them matched is where firms get caught out. Same slab run, or it is not a match. Narrow plots mean side returns rarely happen, most of the work here is making a 2.4m galley work harder.
What decides the price of a worktop in St Johns?
Side-return kitchens are long and narrow with one outside wall, and the wall the run sits against is often the oldest, least straight surface in the house. The template records every angle in that shape as it actually is rather than as the plan drew it. One datum for the whole room. The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. Cut it square where it should be radiused and the piece will fail on the lift, not in the kitchen. Radiused, polished, and clear of the joins. Material runs from £110 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines rather than rolled into one figure.
Do you work in flats and leasehold properties in St Johns?
Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Changing an appliance after the nest is set means recutting the piece, not adjusting it. Dry-assembled before it leaves. Tell us the building when you book and the lift, the stair turn and any freeholder notice get built into the day rather than found on it.
Next step
Get your St Johns kitchen priced
Plans, a sketch or photographs with rough run lengths is enough to start. You get an itemised written quote and the template dates we can offer on this patch.
25-year material warranty and a 5-year workmanship guarantee, both stated on your quote.