Splashbacks and upstands in Upper Edmonton

Yes. Upper Edmonton is on the patch, and the postcodes we work here are N18. It is worked on our north London run, along with the rest of Enfield. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. Splashbacks are normally the last thing off, so a short parking window is exactly when they get rushed. One trip is always better than three. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Working hours are constrained by the business underneath, so noisy work has a window rather than a day. Patched plaster next to original render sits at different depths, and that step is exactly what an upstand covers. Decided before fabrication starts. Landlord refits dominate, so expect worn units that will not take a heavy stone - price for re-fixing or replacing carcass rails as part of the job.

Fore Street is a busy bus corridor with loading bans through the day and shopfront deliveries competing for the kerb. Flats over shops are reached by a separate street door and a straight steep stair with a tight turn at the top. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. Splashback panels are lighter than a worktop and far more awkward, because a tall thin piece has to be carried on edge and cannot be tilted to clear a turn. It decides panel size before anything is cut.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. Splashbacks and upstands are cut from the same slab run at the same time, which is the only way the batch actually matches. Sockets final before template. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. Socket and switch positions have to be final before templating, because a cut-out in the wrong place means a new piece. Siliconed to the worktop, never grouted.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. Upstands follow the run exactly, so every internal and external corner is a separate mitred or butted piece. The joint to the worktop is siliconed, never grouted. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A run can measure dead right at both ends and still belly out in the middle, which only appears once the template plots the intermediate points. Where the wall cannot be made good, setting the stone deliberately proud on a subframe with a shadow gap reads as a detail rather than a bad fit. Make the wall good first, or accept the detail. Boiler position, flue and any pipework drops must be settled and the wall skimmed level before templating the splashback run. Quartz is the sensible default in a rental: nothing to seal, nothing to maintain, and nothing an incoming tenant needs briefing on. A 100mm upstand is the low-maintenance answer, and full-height stone is the one that has to be committed to early. Decided before fabrication, not after.