Worktop installation in Westbourne Park

Yes. Westbourne Park is on the patch, and the postcodes we work here are W2, W9. It is worked on our central London run, along with the rest of Westminster. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. The fitting slot is set around it, which is why we ask about it when the date is booked and not before we leave the yard. We would rather ask than guess. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Cornice, picture rails and deep skirting survive in converted rooms, so the run stands off the wall and the back edge follows the units rather than the plaster. The day is planned backwards from the hall. That is the shape of the day. Galley kitchens in these conversions are frequently under 900mm between runs - with two tops facing each other, get the finished gap confirmed before fabrication or the appliance doors foul.

The Westway and the rail lines cut the area into pockets, so the driving route matters as much as the parking - several streets only connect one way. Conversions have communal halls that must stay clear, and estate blocks need a fob and a lift booking. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. Finding it out on the morning costs the whole slot, because there is no second route to fall back on. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. The fitting day is scheduled to suit that rather than to suit the diary. One visit, done properly. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. One visit, with the sink and hob seated and sealed before we leave. Sealed before we leave.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Floors settle, and once base units are packed and levelled properly the stone sits true while everything else in the room admits it is not. The back edge is eased in progressively rather than offered up once and forced. It is the slow part of the day and it should be. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The fitting day is arranged with whoever can actually give us access for the whole slot. Access for the whole slot, or a different day.