Worktop installation in Bayswater

Yes. Bayswater is on the patch, and the postcodes we work here are W2. It is worked on our central London run, along with the rest of Westminster. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. A van that has to move mid-fit costs the best part of an hour and takes a man off the tools to do it. It is why the arrival time is what it is. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Lease conditions and the other flats in the building decide when noisy work can happen, so the fitting day has a start and a finish that are not ours to set. We measure the front door, the hall width and the turn into the kitchen before anything comes off the van, because a 3m piece has to swing through that corner on edge and stone does not bend to help you. That is the shape of the day. High-turnover rental flats want the cheapest workable spec, so keep it to a plain square-edge quartz with a matching upstand - budget dictates the material here more than taste does.

Almost all flats are conversions with a shared front door, a wide but long communal stair, and no lift above the second floor. Parking is metered and permanently full, and the hotel traffic on the main roads blocks the kerb all day. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. We walk the route with a tape and protect it end to end before the first piece is lifted. That is what the morning is planned around.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Where the window is fixed there is no second day to fall back on, so the prep list matters more than usual. One visit, done properly. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. The fitting day is scheduled to suit that rather than to suit the diary. The prep list is not optional.

The free end is what needs deciding early: square edge, mitred apron down the end, or a full waterfall to the floor, and a waterfall is cut in sequence off the same part of the slab. On the day that means dry-laying the whole layout first and only then pulling and bonding the joins. Dry-lay first, always. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Walls that bow along their length are the normal condition rather than the exception, and a straight-cut back edge will show a shadow gap at one end and touch at the other. Rushing that is what leaves a gap you look at every morning for fifteen years. Dry-lay, mark, cut, then bond. Clear the full hall and stairs route of furniture, bikes, coats and stair-gates, and keep the front door propped and unobstructed for the carry. Access in a tenanted flat depends on the tenant, so the template and fitting dates are agreed with whoever actually holds the keys. A half-day of access is not a fitting day, and it is better to say so at booking than to find out at eleven. Protection goes down first.