Worktop design and quotation in Whetstone

Yes. Whetstone is on the patch, and the postcodes we work here are N20. It is worked on our north London run, along with the rest of Barnet. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. It sits in the fitting line as time on site rather than as anything to do with the stone. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The original kitchen was a small service room, so what is there now is a knock-through and the junction between the two floors is rarely level. The lift car is the single biggest price driver here. That is what the itemised lines are for. Retirement blocks often have restricted working hours and no drilling before nine, so a wet-cut on site is usually not an option and pieces must arrive finished.

The High Road is a red route with almost no stopping, so vans work from side streets; the flat blocks have parking courts and lifts, but many of the older ones have lifts too small for a full-length slab. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. It appears as its own line rather than buried in a rate.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Nothing payable until we template. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. Send photographs of every corner of the room and it gets priced properly first time. Better on the quote than in a variation. Measure the internal lift car, width, depth and height, and photograph the stair turn and landing doors, then send those with the run lengths. Where ownership is split across a building, the common parts belong to someone else and the carry route is negotiated rather than assumed. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Written to be read by whoever is paying.