Worktop design and quotation in Wimbledon Village

Yes. Wimbledon Village is on the patch, and the postcodes we work here are SW19. It is worked on our south west London run, along with the rest of Merton. A red route means no stopping, and no stopping means exactly that, so the stone comes in from a side street or from a bay behind the property. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Conservation and listing conditions are common, which affects what can be altered around the kitchen rather than what stone goes on the units. Big islands are what drive the number. That is what the itemised lines are for. This is book-matching and mitred waterfall work, vein direction has to be agreed on the actual slab before cutting, because a mismatched island end is the one thing that gets rejected here.

The High Street has loading bans through much of the day and there is effectively no on-street parking on the roads facing the Common. Many houses sit behind gravel drives with a wide but soft approach, and side gates are frequently too narrow for a slab, so the carry goes through the front door and down a hallway with a return. A side gate and a back door mean the stone never goes through the house at all, which keeps the dust and most of the risk outside. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. Nothing about it gets estimated after the fact.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop fabrication and worktop installation. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

If the island is a few hundred millimetres longer than the usable length of a slab, a second slab gets bought to gain that overhang, and the whole slab is paid for rather than the part used. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Priced as fabrication, not as area. Send the island size including the overhang and which side people sit at, the stool count, and confirm the edge profile you want and which edges are to receive it. The householder is normally on site at template, and that is the right time to settle sink position, tap centres and overhang rather than agree them by email. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying.