Worktop replacement in Wimbledon Village

Yes. Wimbledon Village is on the patch, and the postcodes we work here are SW19. It is worked on our south west London run, along with the rest of Merton. Loading exemptions on red routes are narrow, time-limited and heavily camera-enforced, so we plan around them rather than relying on them. Waste is the part people forget: the old laminate or tired granite has to be walked back to the van and it does not get lighter. The waste run is planned, not improvised. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

This is book-matching and mitred waterfall work, vein direction has to be agreed on the actual slab before cutting, because a mismatched island end is the one thing that gets rejected here.

The High Street has loading bans through much of the day and there is effectively no on-street parking on the roads facing the Common. Many houses sit behind gravel drives with a wide but soft approach, and side gates are frequently too narrow for a slab, so the carry goes through the front door and down a hallway with a return. Rear access usually lets us fit longer pieces whole, so the join count ends up decided by the slab rather than by the building. Worth remembering that the old tops have to come out the way the new ones come in, and a laminate run is easier to remove in one length than to carry in one. It sets what the day actually looks like.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop design & quotation, worktop fabrication and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. The carcasses have to be sound, because stone is several times the weight of what is coming off. A plumber either side of us. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. The units stay and only the surface changes, so the whole job is one day rather than a kitchen refit. A day, not a project.

An island is a single visible piece with four finished edges and no wall to hide against, so it is the piece the whole kitchen is judged on. Old laminate has often been holding a run square for years, and taking it off shows what the units were really doing. The units stay, the surface changes. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A chimney breast left in place splits a wall into two alcoves, and the two are rarely the same width and rarely parallel to each other. The old top has been hiding it, so the first honest look at it happens when the laminate comes off. The laminate has been covering it up. Have a fitter or joiner fix and level the island units beforehand, and get the sink, taps, hob and any range on site before templating so we cut to the actual appliances. Where someone is living in the house through the work, the strip-out and the fit are planned so the kitchen is out of use for a day and not a week. A plumber disconnects before we arrive and reconnects after we leave, and that is worth booking early. Units kept, surface changed.