Worktop design and quotation in Arnos Grove

Yes. Arnos Grove is on the patch, and the postcodes we work here are N11, N14. It is worked on our north London run, along with the rest of Enfield. Where the frontage is a clearway the unload happens away from the door and the carry gets longer, which is a crew and time question rather than a stone one. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. It is one line among the others, and it is honest. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Permitted works hours are commonly weekdays with a late start and an early finish, so a one-day fit is planned around the porter and the lift. The lift car is the single biggest price driver here. Priced from the building, not from a rate card. In a true galley the two runs have to be templated together - if one wall bows the gap closes and the appliance doors stop clearing.

Bowes Road and the North Circular approach carry heavy traffic with no stopping, so access comes off the quieter residential streets. Maisonettes have their own front door and a straight stair, usually with a tight turn at the top. Communal stairs get boarded and the handrail padded, and we walk the route with a tape before the first piece leaves the van. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. Nothing about it gets estimated after the fact.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop installation. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. In a converted house the flat entrance and the internal doorway are usually tighter than the communal stairs, and that is easy to overlook. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly. Party-wall and lease conditions in a converted building set when noisy work can happen, which shapes the fitting day more than the kitchen does. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Boxing is rarely the same depth at worktop height as it is at floor level, so measuring it low down is the usual reason a top will not sit back. This is the item most often left out of a cheaper quote, and it comes back as a variation once the templater has been. Priced as fabrication, not as area. Measure the internal lift car, width, depth and height, and photograph the stair turn and landing doors, then send those with the run lengths. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying.